Planted Seat Bracket Infiniti G35 (2003-2007) – TALL – Driver

There are two versions of the G35 Driver Seat Bracket; LOW and TALL. The LOW version (SKU: SB075DR) of this Seat Bracket is made to put the seat as close to the floor as possible without modifying the floor, while the TALL version is about 1 inch taller.

The passenger side floor has a “hump” in the transmission tunnel making the passenger side seat bracket different then the driver side. There are two versions of the Passenger Seat Bracket; LOW and standard. The standard Passenger Seat Bracket positions the seat above the “hump” and will be about 2.5 inches taller then the LOW Driver bracket and 1.5 inches taller then the TALL Driver bracket. The LOW Passenger bracket positions the seat behind and below the “hump” and will be about the same height as the TALL Driver bracket. However, please note that due to being postioned behind the “hump,” the passenger seat sliders may not be able to slide forward because the seat will run into the “hump.” The passenger sliders will be able to slide backward though.

Install any aftermarket racing seat in your vehicle with a high strength 3/16″ steel Planted seat bracket is made just for your vehicle. They`re precision made and durable for an easy, reliable installation. They are finished with a black powder coat and applications are available for most cars. Price is for one seat bracket only.

No one needs to tell even the newest car owner that part fitment varies between vehicles. When it comes to designing a single part to fit in a wide variety of vehicles, some sort of customization is inevitable. Seats are no exception. Although some seats are interchangeable between different models (but the same make), in general the only factory seats that will fit in your vehicle are the ones made specifically for it. This is because the mounting locations for factory seats and the curvature of each vehicle`s floor pan differ from car to car. If you plan to install universal aftermarket seats, you will need a seat bracket for your specific application in order to make them compatible with your vehicle. Our seat brackets are made of high strength steel flat bars, welded together and drilled with precision, and powdercoated for corrosion resistance, longevity, and aesthetic appeal. The result is a sturdy foundation that you can rely on to hold your seat firmly to your floor for years to come. All this for a price that won`t break the bank.

Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.
– Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.
– Replacing a factory seat with an aftermarket seat may cause the vehicle`s warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use.
– Due to variations from oem brackets to aftermarket brackets, additional hardware may need to be purchased to mount the seat brackets to your stock mounting points.
– Professional installation is recommended.

Manufacturer Part Number: SB075.1DR

** If listed as Out of Stock / Special Order, Planted seat brackets are made to order, therefore, please allow approximately 4 weeks for delivery.